Skip to content

Bench Sander

Clarke CBS1-5 Belt & Disc Sander

  • 300 Watt, 230V motor
  • 1" x 30" sanding belt operates at 13.5 metres/sec. Tilts and locks at any angle 0 - 45º
  • 5" dia. circular sanding disc runs at 2,800rpm
  • Workpiece table dimensions - belt 127x127mm, disc 89x178mm (tilts & locks from 0° to 45°)
  • 45mm O/D dust extraction port
  • Supplied with an adjustable mitre gauge and fitted with medium grit abrasive belt & disc
  • Dimensions (LWH) 360x280x360mm

Manual

Manual

Safety

  • Wear eye protection - hot debris in the eye is not pleasant
  • Do NOT wear gloves - they could get entangled and pull your hand into the machine
  • Don't leave the sander until it has completely stopped spinning - other members may not realise it is still dangerous

Risk Assessment

Category:Equipment Category:Stub